Operating Instructions
When installing or relocating the machine for the first time, unplug the (OUT) pipe end and start the main unit (to clean the water pipe, prevent the nozzle from being blocked, and expel air and impurities). After running the water for 60 seconds, turn off the main unit, plug the (OUT) pipe end back in, and then turn on the power.
The following steps should be followed:
1. Unplug the ends of the tubing at both ends.
2. Open the system and allow the water to flow through the pipes for at least 60 seconds.
3. Close the system and plug back the ends of the tubing.
4. Finally, open the system and begin normal operation.
